It has become the norm to run the air conditioner all day long during the hot summer months, but with that comes the problem of overspending on electricity bills. Juteng Air Source focuses on improving the energy-saving technology of its products, and all its products are of Grade 1 energy efficiency, with obvious advantages in energy saving and power saving. Product energy efficiency is the most important factor to achieve energy-saving effect, but life there are some use of tips that can make energy saving to the next level, master these use of tips, enjoy the beauty of the summer.

01 Reduce Frequent Switching

Some users may think that the use of air can be the same as other appliances at home, with the use of open without closing, that can save electricity, but the fact is just the opposite, air source frequent switched on and off not only does not save electricity, but more power consumption. Frequent switching, not only did not play the effect of energy saving, but let more time wasted in the cooling process, increasing the operating costs of the cooling process, the temperature of the room will not be constant, the comfort will also decline.

▖▖

For the control of the air source switch, air source central air conditioning, for example, the correct approach is : not commonly used rooms can be turned off cooling, commonly used rooms to keep the cold air running normally, if there is a short period of time out of the house (1-2 hours), you can set the temperature of the thermostat a little higher, and then lower the temperature when you return to your home again, so that not only to maintain the temperature of the room, but also play a role in the effect of energy saving.

02 Water Temperature Settings Should be Reasonable

In the process of use, many users in order to let the room cool down quickly, the temperature will be set too low, or even directly to the extreme value. The higher the ambient temperature, the air unit to reach the value of the set heat will be more costly, and in order to meet the temperature demand, the higher the set temperature the more power saving.

▖▖

For air source temperature control, the correct approach is : when the temperature inside the room after the constant temperature, the cooling water supply temperature setting up, control the flow of the system as well as the flow rate, which is sufficient to meet the indoor supply of cold, the frequency of air source startup will be reduced, the corresponding air source consumption will be much lower.

03 Avoid Covering the Outside Unit

Some people are worried that the air source host will be damaged because of climate reasons, and therefore will give the outer machine cloaked in protective materials, in fact, the air source host has a protective function, blocking the outer machine instead of affecting the absorption and release of heat energy, increase power consumption. Because the air source heat pump as the name suggests need to use the air, the more air circulation effect is better.

▖▖

For the control of air source protection, the correct practice is : the air source main unit should be installed in direct sunlight, warm, air circulation, the surrounding area should be clear and keep ventilation.

These small tips to save electricity in life, the practice of simple and easy to operate, adhere to, and long-term accumulation can help users save a considerable amount of money, in addition to protect the savings is a virtue we should promote, for the protection of the ecological environment to add bricks and mortar.