400-185-1868
en
EN CN
24 YEARS' FOCUS ON HIGH-GRADE STAINLESS STEEL HEAT PUMP
Air source water heater to work well? Juteng teaches you 4 ways to use it correctly!
Upload Time:2023-08-12

With the improvement of the requirements for the quality of life, more and more families are installing air source water heaters with the characteristics of safety, energy saving, environmental protection and comfort, such as Juteng air source water heater, which has become the choice of many users of villas, cottages and self-built houses. But are you really using your water heater the right way? Mastering the correct way to use the air source water heater will bring the whole family a better experience of comfortable hot water life.


- Air Source Water Heater -


Proper Ways to Use


Installation in A Well-ventilated Area


Air source water heaters rely on the absorption of free heat in the outdoor air to heat, so placed in a ventilated place will greatly benefit its efficiency, can be placed in the yard, balcony, roof and other ventilation. In addition, it should be noted that the user of the house area is large, to reasonably design the water heater installation location, the distance from the water point is too far away from the hot water is likely to lead to poor results, reasonable installation location to realize the whole house hot water with the opening of the hot water, hot water in a second, the water temperature is constant has a better help.



Make Drainage Facilities or Floor Drains


This is mainly for the environment of low temperature and high humidity in winter, the host of the air source water heater in this environment is easy to frost. Although most of the current air source water heaters have been set up with intelligent defrost function, but frequent defrost will accelerate the loss of the host. Therefore, the installation of good drainage facilities or floor drains, can prevent the air source water heater condensate discharge, resulting in indoor floor surface water flooding to produce other problems.



Preset Water Temperature According to Season


Different seasons have different temperatures, so the human body accepts different comfort temperatures, so according to the different seasons to set the water temperature, so that all seasons will feel consistent and comfortable. Winter temperature is low, with a large demand for water heater, then you can set the water heater target temperature higher, so that can fully meet the water demand. In summer, when the temperature is high and the demand for hot water is low, you can set the water temperature target lower. Presetting the water temperature according to the season will allow everyone to get the highly suitable water temperature first time when using water in all seasons, and the comfort will not be reduced. Setting the water temperature in response to changes in the environment is also more energy efficient.



Turn Off the Power When Not in Use for A Long Time


Users who do not use the air source water heater for a long time need to turn off the power and empty the water in the pipeline, which can prevent the pipeline from freezing in the winter, and usually do not waste electricity for nothing. A long time without re-running, also remember to start before the system for a comprehensive inspection, while it is recommended to clean the water tank before use.


Of course, the most direct way to guarantee the effectiveness of the air water heater is to choose the right brand. As a 23-year veteran in the industry, Juteng Air Source has thousands of successful hot water cases across the country and created an installation team with rich engineering experience, which can tailor the most cost-saving, comfortable and practical domestic and commercial hot water project solutions to meet the requirements of customers according to the situation on the ground and the needs of users.