Domestic air source water heater in winter use often appear hot water is not enough and the temperature is not enough, most of the use of the process of improper operation. Winter gas is colder, less heat energy in the air, ordinary air source water heater energy efficiency ratio will be reduced relative to the summer, so the amount of water production will be reduced, the temperature is not enough. So, to be able to efficiently use the air source water heater in winter what to do?

Watch out for these 5 things in winter with an air source heater

▲ temperature debugging, the user in the spring, summer and fall seasons when using, due to the air source water heater water production is sufficient, will run the temperature will be adjusted slightly lower, such as 45 degrees or so, if the winter does not adjust the temperature in a timely manner, it will lead to the use of the time of production of water can not be supplied to the speed of the water use, it is recommended that the temperature of the control panel to adjust the temperature of 55 degrees.

▲ have water return, water return do not set automatic mode, because of the low temperature in winter, the water inside the pipe is easy to cold, will lead to frequent water return, the water temperature in the tank is easy to cause unnecessary loss, the winter will be adjusted to the water return to the manual mode, or the water flow mode and remote control mode.

▲ water habits, due to the lower temperatures in winter, the air source water heater water production will be relatively low, so the user in the selection of the time if there is no match with a particularly sufficiently large tanks, the use of winter in addition to pay attention to the above two things in addition to trying not to concentrate on water, family bath time to stagger the water for the best.

▲ Good pipe insulation, the colder the ambient temperature the colder the water temperature of the air source water heater drops faster. If the hot water pipe and return pipe do not take insulation measures, heat consumption will be accelerated. Therefore, in the winter to check the insulation of the pipeline, have to do insulation to strengthen the insulation, did not do insulation is recommended to add insulation, which can improve the operating efficiency of the host and reduce the operating time.

▲ Pay attention to the frost situation, in the cold winter, the air source water heater will appear frost situation, this is a normal phenomenon. Frosting of the heat pump will lead to a decrease in heating capacity and an increase in energy consumption. If the mainframe is started before the frost completely melts, the mainframe will freeze, and the more frost is formed, the more it will enter into a vicious circle, which will cause the mainframe to fail to work properly, so pay attention to the frosting situation of the air source water heater.

If you think to pay attention to these issues is too much trouble, then at the beginning of the right air source water heater can be free of worries. Juteng stainless steel air source water heater using the internationally renowned brand compressor, winter is still strong and efficient heating; large water volume, temperature sufficient, winter multi-point water pressure; automated frost function, intelligent identification of the equipment frost conditions, precise frost defrost; installation specifications, pipeline standard with thickened insulation layer, winter water temperature is still comfortable and warm.

As one of the top ten brands of air source in China, Juteng has many cases, rich installation experience and guaranteed quality.