Air source in the heating season need to maintain up to several months of use, then the air source heat pump in the operation process, energy consumption is mainly generated in which places, and how to use can be more energy-saving? Juteng stainless steel air source summarize the main 3 points.

Reasons for Electricity Consumption in Air Source Use

▼

① Regional Climate Temperature

The lower the ambient temperature, the more energy is needed to heat the air source heat pump, so the power consumption will increase. In addition, the ambient humidity also affects the frequency of frosting of the unit, and the process of frosting and defrosting will consume additional electricity.

② Type of end connection

Different heating ends have different requirements for water outlet temperature. For example, the water outlet temperature of radiant floor heating is only 35-40 ℃, while the heater needs more than 55 ℃. The higher the outlet temperature, the corresponding increase in power consumption.

③ Indoor insulation

The insulation of a building affects the calculation of the heat load. If the insulation is poor, more heat is required to maintain the indoor temperature, thus increasing the power consumption. Conversely, good insulation can significantly reduce the amount of heat required, thereby reducing power consumption.

Air Source Saving Response

▼

1. Select the right equipment operating range

According to the natural environment of the local climate, reference to the lowest temperature in history, to reasonably select the scope of operation of the equipment, to avoid too little power because of the equipment caused by the “small horse-drawn cart” situation, increasing a lot of additional energy consumption, but also shorten the life of the equipment. For example, the choice of Juteng -35 ℃ ultra-low temperature stainless steel air source, to meet the vast majority of northern regions.

2. Regular maintenance of the host and end

In the new house decoration, you can try to consider the floor heating end, because the floor heating end of the water temperature requirements of the lowest; another point is that, for has been running for a long time of the host and end, to regular maintenance and cleaning, to avoid internal scaling, clogging, etc., to keep the equipment and the end of the pipeline smooth, improve the operating efficiency.

3. Do a good job of house insulation

Before the start of the heating season, do a good job of house insulation, improve the airtightness and warmth of doors and windows, which can reduce the temperature difference between indoor and outdoor, thus reducing the operating time of the equipment and reducing energy consumption.