Air source its operating principle is effective energy saving, especially if you choose a higher energy efficiency rating of the air source heat pump, such as Juteng 1 energy efficiency stainless steel air source heat pump, you can save energy on the basis of energy saving further electricity.

After selecting the equipment into use, users can also further reduce energy consumption through more targeted use habits, so that air source heating is more energy efficient, low-cost to enjoy a comfortable and warm life. Juteng stainless steel air source summarize the five key points to save electricity.

1. Setting the optimal temperature

It is recommended to set the indoor temperature between 16℃-26℃ in winter, and the optimal temperature is about 22℃. Every 2℃ lowering can save more than 10% of electricity.

2. Avoid frequent switching on

When not in use for a long time, keep the air source unit running instead of turning off the power, because restarting after turning off the power will consume more electricity, and at the same time there is a risk of freezing the unit when it is shut down.

3. Optimize house insulation

Good house insulation can reduce heat loss, thus reducing the frequency of heating and power consumption of air source, so try to do all the insulation you can.

4. Reasonable configuration of air source

According to the room area and geographical location, the environment and other actual conditions to choose the appropriate air energy model and configuration, too large or too small will cause an increase in energy consumption, the appropriate selection is the most optimal choice for energy saving, to ensure that the equipment operates in a highly efficient state to achieve energy saving.

5. Adjust the indoor temperature

Reduce the indoor temperature appropriately while meeting the comfort level, because the higher the temperature setting, the frequency of air source startup and power consumption will increase.

Compared with traditional electric heaters, air conditioners, etc., air source equipment consumes less electricity to meet the same conditions of heating. And through the development of these usage habits, not only can you improve the energy efficiency of air source heating, but you can further reduce energy consumption and save a lot of heating costs in the long run.